Dust free clean room introduction The clean room at the ISO 5 level is less than 3,520 particles per cubic meter, equivalent to the 100 level of the Fed's std.209e.In the clean room of level 5, it is recommended to use ionic electrostatic eliminator to eliminate static electricity. In the...
The clean room at the ISO 5 level is less than 3,520 particles per cubic meter, equivalent to the 100 level of the Fed's std.209e.In the clean room of level 5, it is recommended to use ionic electrostatic eliminator to eliminate static electricity. In the clean room, the personnel should wear dust-free clothes, and dust covered their body, head, face, hands and eyes. In workstations and production sites, all additional ion equipment can be observed. In the clean room as far as possible contamination of the mix of carbon and amino antistatic agents. Due to the advantages of non-loss of moisture absorption and non-polar solvents, the polymer of intrinsic conductivity is widely used in clean rooms. The goods must be cleaned first and then used double layer packaging to enter the ISO5 level clean room through the air shower room. Gloves cover the arms without exposing the skin. Amino compounds in the materials of amino antistatic agents may contaminate the surface of the device, unless such antistatic agent is not included, otherwise, the antistatic pad of vinyl is restricted. Do not use non-purifying plain paper and pens. The manufacturer needs to have one or more dedicated purifying control engineers to deal with ESD problems and purification problems. Too large to use a double bag packing equipment must be wiped with 70% non-polar detergent or cleaned with deionized water before entering the clean room.
1.Low cost: We have a professional team with technical knowledge and managerial experience. Our company has advanced equipments for manufacturing. By virtue of perfect managerial system and excellent quality , so we can always keep the price competitive and reasonable.
2.Richer Experience: We was founded in 2002. Up to now, Our products have been exported to more than 40 countries, such as Russia, Australia, USA, UK, Germany, Ukraine, Iran, Romania, Hungary, Mexico, Brazil, Chile, Canada, Spain, Colombia， etc. We have agents in the USA, Australia, Singapore, Kuwait, Russia.etc, so we can provide high service to our clients.
3.Higher Quality: We have a professional team with technical knowledge and managerial experience. Our company has been through professional quality system certification, CE certification, SGS audit, TUV audit, and as a member of the China national resources recycling association. So that we can guarantee the best quality of our products.
4.Has a long history: Our company was stablished in 2002. We can provide you with intimate price.
Ø Provide the technical design and solutions;
Ø New plant construction guidance;
Ø Designing and manufacturing of non-standard equipment;
Ø Professional technical training and guidance on site according to the contract;
Ø Supply accessories at any time;
Ø Tele-technical consulting and services;
Ø Other special technical service according to client’s requirements.
1. Checking raw material before producing.
2. Checking one by one before the assebling
3. Checking one by one during the production
4. Have the random inspection before the delivery.
2002 Wuxi RongFeng air conditioning purification equipment factory was established;
2010 Signed the RongFeng trademark officially, and set up the electrical and Mechanical Engineering Department;
2013 Damon strapdown Electromechanical Engineering (Wuxi) Co. Ltd. was established;
2014 VC Engineering Sdn Bhd (Malaysia Own Company) was established;
2015 Clean room construction and installation of mechanical and electrical business, more than 18 million.
1.Q:What is your minimum order quantity, can you send me samples?
A:Our minimum quantity is 1 set, as our product is machinery equipment, it’s difficult to send you samples, however,we can send you catalog, wrmly welcome you to come visit our company.
2.Q:What is the delivery time of your machine?
A:In general, the delivery time of our machine is about 30 days, customized machine will be delivered as the negotiation with our clients.
3.Q:Can the machine be customized as our need, such as put on our logo?
A:Surely our machine can be customized as your need, Put on your logo is also available.
4.Q:About the after-sale service, how can you solve the problems occurred of your overseas customer in time?
A:The warranty of our machine is normally 12 months, during this period, we will arrange the international express immediately, to make sure the replace parts to be delivered as soon as possible.