Home > Exhibition > Content

Application Process and Notice of Vertical Stratospheric Clean Workbench

Aug 16, 2018

First of all, before using the vertical flow level clean worktable, the lighting and fan box should be turned on and the maximum wind speed should be adjusted. It is usually necessary to run twenty minutes ahead of time and clean up the work table. And the cleanliness of the cleaning worktable should also be kept in use. If you leave after a long time, you should turn off the lights and the power supply of the fan box in time.

 

In addition, the vertical laminar clean workbench and surrounding environment should be cleaned up. It should be noted that the wind speed must be adjusted to the maximum extent during use. And workers must wear clean work clothes and work caps.

 

In the whole operation process, we need to avoid larger movements such as scratching, walking and so on. No articles are placed on the vertical flow layer clean table. The head and hand of the staff should be avoided as far as possible on the top of the product. If necessary, wear rubber gloves or finger sleeves. It is necessary to ensure the cleanliness of the worktable before, during and after use. If abnormal, it should be dealt with promptly.http://www.wxrfcleanroom.com/