Home > Exhibition > Content

Construction requirements and maintenance of floor in purification workshop

Sep 10, 2018

There are many choices for workshop floor of purification project, such as concrete floor, anti-corrosion floor, anti-static floor, self-leveling floor, dust-proof floor and so on. Which floor should be chosen specifically depends on the purpose of the plant and the requirements of the purification works.

 

After the construction of the floor of the purification engineering workshop, avoid overweight, hard, abrasive objects placed on the ground, do a good job in the initial period of maintenance, and solidification, can improve its service life, as well as the performance of the floor itself. After the floor is put into use, pay attention to regular maintenance, if there are a large number of corrosive materials, do a good job of anti-corrosion treatment, timely cleaning up the corrosive.

 

In the process of floor construction of purification project, it should be smooth, smooth, uniform, no knife mark and interface, suitable for the electronics and microelectronics industries which require high cleanliness, beauty, dust-free, sterile, GMP standard pharmaceutical industry, blood products industry, schools, offices, families and so on.

 

According to past experience, the floor of purification project is made of solvent-free epoxy resin and high-quality curing agent; the surface is smooth and beautiful, reaching the mirror effect; at the same time, it must be resistant to acid, alkali, salt and oil medium corrosion, especially strong alkali resistance, moisture-proof and wear-resistant.http://www.wxrfcleanroom.com/