Air shower transfer window is a very common auxiliary equipment in clean engineering. It is mainly set in the middle of clean and non-clean areas. It can transfer goods while reducing the number of opening doors in clean areas, so as to reduce the possible pollution to clean areas. In order to build a dust-free workshop, it is necessary to use the air-shower transfer window.
Although it only plays an auxiliary role, the air-shower transfer window has been widely used in the fields of micro-technology, aseptic laboratory, pharmaceutical factory, hospital, food processing industry, LCD, electronic dust-free workshop and other industries. It is the foundation of the construction of aseptic and dust-free production environment.
In order to satisfy the beauty and a series of good performance, the structure design and material selection of the air-shower transfer window are meticulously completed. For example, its working table is made of stainless steel, which not only can make the surface smooth and clean, but also has the characteristics of wear resistance and dust-proof.
The two doors of the air shower transfer window are equipped with mechanical interlocking function or electronic interlocking, that is to say, as long as one of these doors is opened, the other door will be locked to prevent pollutants from entering at the same time, and also equipped with ultraviolet bactericidal lamp, so as to reduce the production of bacteria.
As for the shape and size of the air shower transfer window, it should be designed and manufactured according to the needs of users, so as to fully reflect its practicability. In the process of installing the air-shower transfer window, the first step is to open the hole in a convenient location on the wall, which is about 10 mm larger than the outside diameter of the transfer window, and then put the transfer window into the wall and keep it balanced and fixed.
It should be noted that after the installation of the air shower transfer window, not only the gap between the transfer window and the wall needs to be decorated with rounded corners or other decorative strips, and sealed with glue, but also the reliable grounding, requiring the grounding end of the power socket to be connected with the transfer window, so as to ensure personal safety to a certain extent.www.wxrfcleanroom.com