Home > Exhibition > Content

Use Method and Cleaning Process of Stainless Steel Transfer Window

Apr 15, 2019

Stainless steel transfer window is a kind of clean auxiliary equipment. Although it has the function of sterilization and reducing bacterial contamination, if it is not cleaned after a period of time, the bacteria inside it will not play the role of sterilization, but will further contaminate the transfer material in the transfer window. Therefore, in addition to mastering the correct use of stainless steel transfer window, but also learn to clean it.


Usually, the door of stainless steel transfer window is closed. When the material is transferred, the transmitter rings the doorbell and opens another door when the other party responds. After the material is sent in, the door closes immediately. The receiver opens another door, takes the material out, and closes the door again. It is strictly forbidden to open both doors at the same time. The stainless steel transfer window should be cleaned and disinfected regularly after operation.


The stainless steel transfer window cleaning cloth and disinfectant wipe are used to remove the dirt on the inner wall of the transfer window, the roof of every corner, the ultraviolet lamp tube, the transfer window door and so on. Brush and disinfectant can be used to clean the dirt where the dirt accumulation is thick, and disinfectant can be used to disinfect if necessary.


In the process of using stainless steel transfer window, we should use ultraviolet light to disinfect. We should form a good habit of cleaning stainless steel transfer window regularly, and disinfect the inside and outside of the transfer window with disinfectant every week after use. When the stainless steel transfer window is cleaned, it will be affixed with the "cleaned" status sign card after the professional Inspector checks it to be qualified, indicating that it can be put into use normally.www.wxrfcleanroom.com