Home > Exhibition > Content

What are the requirements for the solar cell production workshop?

Apr 02, 2018

In the solar cell production workshop, considering the production cost and other problems, it is necessary to strictly control the quality of the production environment. Moreover, the environmental requirements of such products are almost harsh. They usually require sterile environment, no static electricity, no dust and no harmful gases. So battery components need to be produced and produced in a solar cell production workshop with high grade cleanliness.

 

Only to meet this requirement can the quality of the product be improved to the greatest extent, so as to avoid the discarding of the product. Therefore, for these production enterprises, in the process of producing battery components, the solar cell production workshop is very important. So, what needs to be met in the production workshop environment?

 

First of all, we should know that there are antistatic and anti vibration requirements in the production process of the electronics industry, and there are many kinds of gases and kinds of indoor gases. Therefore, the solar cell workshop has high purity and cleanliness requirements. It includes the requirements of the air noise level in the production workshop.

 

Secondly, the layout of the solar cell production workshop should be reasonably arranged so as to ensure the appropriate proportion distribution. Typically, unidirectional flow clean room is greater than or equal to 40% vertical flow clean room is less than 60%, only in this way can, otherwise it will become part of the unidirectional flow.

 

Third, the heater of clean air conditioning system in solar cell workshop should be protected by fresh air and over temperature interruption. In areas with relatively cold weather, anti freeze protection measures for the new wind system should be set up.

 

In conclusion, the high-performance solar cell workshop can provide Gao Jie clean air environment for the production and production of battery components. Only in such an environment can we ensure the safety of electronic chips.http://www.wxrfcleanroom.com/